Technologies
Reman Programs and Equipment
Control Systems and Flow Computers
Floating Production Storage and Off-Loading
FMC Technologies Distributed Products
Gas Measurement
Gas Measurement Systems
Liquid Measurement
INVALCO
Liquid Measurement Systems
Applications
Services
Online Services
Contact Us

Slim Line Skids SLS Modules

Slim-Line Skid

SLS standard modules provide a 500 mm wide grid pattern for super compact systems, matching the typical bottom loading arm spacing. After completion, every system is going through a hydro pressure test and is fully functional checked and hydrocarbon fuel flow tested at the factory.

 

The Smith Meter system modules have been designed to fulfill internal and logistical requirements as well as the regulations for the International and the European market:

  • Pressure Equipment Directive 97/23/EC (PED)
  • Directive 94/9/EC for Equipment and Protective Systems (ATEX) intended for use in potentially explosive atmospheres
  • National Weights & Measures directives such as the European Measurement Instrumentation Directive 2004/22/EC (MID)
  • Federal Immission Control Act TA-Luft (VOC regulations)

Benefits

  • Skid mounted modular design with minimal footprint
  • Extreme slim for bottom loading setups (grid of 500 mm)
  • Typical operating ranges from 250 L/min to 2,500 L/min
  • Designed for bottom and top loading applications
  • Cost savings through factory assembly and easy to install standardized modular design
  • Options for individual configurations
  • Full factory flow and functionality testing providing fault-free start up
Comes with all approvals and certificates

Standard Stainless Steel Standard Frame

SLS metering modules come on Stainless Steel Frames that are entirely maintenance-free and provide long service life.

E-Type Strainer

The strainers protect meters and valves and can be equipped with delta pressure measurements.

CAP-25 Cyclone Air Purger

The air release is equipped with an automatic float valve and a liquid level status switch. CAP’s enable the necessary liquid phase metering conditions in particular for custody transfers.

PRIME4 Volumetric Flow Meter

High-precision positive displacement flow meter which contains integrated pulse output.

210 Digital Flow Control Valve

These valves provide automatic upstream relieve for loading arm over pressures and for top loading applications the check valve functionality against back flow.

PT100 Temperature Sensor

This precise temperature measurement interfaces with a cost efficient directly connected 4-wire-resistance technology.