Technologies
Reman Programs and Equipment
Control Systems and Flow Computers
Floating Production Storage and Off-Loading
FMC Technologies Distributed Products
Gas Measurement
Gas Measurement Systems
Liquid Measurement
INVALCO
Liquid Measurement Systems
Applications
Services
Online Services
Contact Us

215 Set-Stop Valve

215 Series Set Stop Valve
The Smith Meter® Model 215 Series Digital Control Valve is a high-performance valve with solenoid controlled, pneumatic/hydraulic actuators. It is typically used in conjunction with the Smith Meter AccuLoad family of electronic preset controllers.

 

Sizes

  • Model 215 Wafer Sphere Valve- 3” to 12”
  • Model 215B V-Ball Valve- 1” to 3”

Main Valve

  • Body: Carbon steel
  • Disk and shaft: Stainless steel
  • Seat: PTFE
  • Other materials available on request.
  • Meets NACE MR-01-75 requirements

Actuator

  • Body: Carbon steel
  • Diaphragm: Buna-N
  • Air supply: Clean dry air or gaseous nitrogen
  • Hydraulic supply: Clean hydraulic fluid, Dextron II or equivalent
  • Operating pressure: 100 psig maximum, 60 - 85 psig normal
  • Operating temperature: -20 F to 150 F (-29 C to 68 C)

Needle Valve

  • Body - Standard: Brass
    • Optional: Stainless steel
  • Tubing and fittings - Standard: Steel
    • Optional: Stainless steel

Solenoids

  • Standard: Brass with Buna-N disk
    • Optional: Stainless steel with Viton disk for service in corrosive atmosphere
  • Operating pressure: 85 psi maximum
  • Operating temperature: -40 F to 180 F (-40 C to 82 C)
  • Voltage: Standard
    • 102-120 Vac 60 Hz
    • 94-110 Vac 50 Hz
    • 204-240 Vac 60 Hz
    • 188-220 Vac 50 Hz
  • Voltage: Optional
    • 20-25 Vdc
    • 10.2-12.6 Vdc
  • Other voltages, consult factory