Technologies
Reman Programs and Equipment
Control Systems and Flow Computers
Floating Production Storage and Off-Loading
FMC Technologies Distributed Products
Gas Measurement
Gas Measurement Systems
Liquid Measurement
INVALCO
Liquid Measurement Systems
Applications
Services
Online Services
Contact Us

210 Series Set-Stop Valve

210 Series Set Stop Valve

The Smith Meter® Model 210 Valve is typically used in conjunction with the Smith Meter AccuLoad family of electronics for preset controllers at either load racks, bulk plants or processing installations. The valve is hydraulically-operated and diaphragm -controlled utilizing normally-open (N.O.) and normally closed (N.C.) solenoids for flow control. Liquid control is accomplished by using line pressure for actuation of the valve.

Features

  • Sizes 2” to 6”
  • For use with electronic preset controllers
  • In-line serviceability
  • Operating pressure up to 300psig (2,068 kPa)
  • Viscosities up to 40 cP

Maximum Viscosity

  • Up to 200 SSU (40 mPa.s)1
  • Above 200 SSU (40 mPa.s), consult factory

Pressure Rating/Connections2,3

  • Class 150 ASME, 285 psi (19.6 bar)
  • Class 300 ASME, 300 psi (20.7 bar)

Temperature Range

  • Low Swell Buna: -20 F to 200 F (-28 C to 93 C)2,4
  • Buna-N: -20 F to 200 F (-28 C to 93 C)2,4
  • Viton: -20 F to 350 F (-28 C to 177 C)2,4

Voltage (Solenoids)

  • Standard:
    • 110/120 Vac, 50/60 Hz
    • Optional:
      • 220/240 Vac, 50/60 Hz
      • 24 Vdc
      • 12 Vdc
      • Other voltages, consult factory

      1 1 mPa.s = 1cP.

      2 Pressure ratings are based on temperatures of -20 F to 100 F (-28 C to 38 C). For operation at higher temperatures, the maximum working pressure may be derated.

      3 PED requirements limit applications to liquids with maximum vapor pressures of .5 bar above atmospheric pressure, at maximum allowable temperature.

      4 For temperature outside these ranges, consult factory.