Technologies
Reman Programs and Equipment
Control Systems and Flow Computers
Floating Production Storage and Off-Loading
FMC Technologies Distributed Products
Gas Measurement
Gas Measurement Systems
Liquid Measurement
INVALCO
Liquid Measurement Systems
Applications
Services
Online Services
Contact Us

418 and 420 High Pressure Dump/Control Valve

The Series 418 and Series 420 are ideal for high pressure separators, dehydrators, or any application where it is necessary to control the fluid output.

Features

  • Ductile or Steel Bodies - Meets all application demands.
  • Hammer Union Construction - Reduced downtime for repair.
  • Wide Range of Trim Sizes - Meets all operating conditions.
  • Globe or Angle Body - Ease of piping.
  • Nace Adaptable - Can be modified for use in sour service.

 

Specifications

Body Material  Series 420 Steel WCB
Series 418 Ductile A-395  
Packing  Non-Lubricated Buna N 
End Connections   1” and 2” FNPT   Temperature Limits   -20 F to 250 F (-28 C to 121 C)
Body Cover   Steel, Union   Stem Material   303 Stainless Steel  
Diaphragm Operator   Steel, 65 sq. in.
Nylon Reinforced Buna N Diaphragm,
Maximum Recommended Operating Pressure 70 psi
Maximum Containment Pressure 100 psi  
   

General Notes:

1. Standard topworks is direct action (normally closed) with 65 sq. in. effective area
2. Cv and Cg values are for fully open inner valve
3. Part numbers applicable only when valve desired is exactly as described above
4. To order specify model number, part number, and trim description
5. See attached pdf below for parts list