FMC Technologies provides loading sections in a variety of designs and configurations. Link-Belt® loading sections can be configured for your application and may be fitted to a variety of belt profiles. All FMC Loading Sections are supplied with Link-Belt impact idlers as standard. High impact slider beds are available as an option. Link-Belt loading sections can be installed and removed from the conveyor system without the need to "break the belt". This results in increased up time and eliminates the need for expensive and time-consuming belt splicing.
Tail Sections
The tail section, located at the opposite end from the discharge end of the belt conveyor system, is an essential part of every conveyor system. Link-Belt tail sections consist of an A-frame tail piece equipped with a pulley mounted onto a frame. Most also have a belt plow mounted to the frame to prevent fugitive material on the return belt from being trapped between the belt and the pulley. The A-frame tail piece must be accompanied by an intermediate loading section.
Tail Loading Sections
A tail loading section has the same features as the tail section plus the addition of an integral loading section. FMC manufactures a variety of Link-Belt electric tail loading sections, as well as specialty hydraulic boom tail loading sections.
Intermediate Loading Sections
FMC offers Link-Belt intermediate loading sections for all transition angles, with associated chute and skirt arrangements.
For Customer Support please call +1 800 356-4898.