Water in Oil Monitors

Designed to provide the highest possible sensitivity, resolution and accuracy for water content determination in crude oil, other hydrocarbons, or other low dielectric liquids from a maximum of 25% to levels below 1,000 parts per million (ppm).  In oil and gas (condensate) productions, water cut and S&W measurements are significantly improved with the WCM 7300 technology. 

For additional information on the WCM 7300, please click here. 

The WCM 7300E is designed to lower the cost measuring the water cut or S&W in larger pipelines where the use of an inline probe is not economical.  This unit maintains the accuracy of our inline WCM 7300, but can be installed into any size line above three inches.

Please click here for additional information and specifications. 

Model 4528 EZ Detector Model, 4728 BS & W Monitor and Model CX-645 Probe

The INVALCO Model 4728 S&W Monitor, in conjunction with a Model 4528 EZ Detector and a Model CX-645 Capacitance Probe is a continuous on line monitor or percent water in a flowing crude oil emulsion stream.  This unit displays percent of water in various ranges from 0-5% up to and including 0-20% on a digital LCD indicator.  In addition, the Model 4728 provides a 4-20mA analog output proportional to input range, and a field adjusted, time delayed, limit relay for valve control or alarming.

The Model 4728 utilitzes CMOS circuitry for low power consumption, high reliability, and wide temperature stability.

For additional information and specifications, please click here. 

The INVALCO Net Oil Computer is used to determine net oil, net water, BS&W content, and net gas produced in a well test or similar operation.

For additional information and specifications, please click here.