| Experience, service, and performance are what you can expect from INVALCO - the company that has a proven record for quality and dependability. To learn more about the controls we have to offer, please click on the links at the bottom of the page, or the graphics to the right. Either one will take you to the correct location.
Model CM7 Pilot Guard
The CM7 Pilot Guard is designed to provide positive shut-off of the gas supply to both the pilot and main burner in the event of a flame-out. The CM7 requires no external power source, and can be used in remote locations where no electrical power is available.
Model 80 Gas Scrubber
The Model 80 Gas Scrubber Valve is used in Fuel Gas Scrubbers, and Air Eliminators. Installs through 2" pipe coupling or can be wholly contained by mounting by 1" nipple welded through cover. Can be used as a replacement for the Model IC-125 Scrubber Valve.
Model CTS-5025 Temperature Controller
The Model CTS-5025 Pneumatic Type Temperature Controller provides pneumatic temperature control in a wide control range. It can be set to control at temperature from 0°F to 750° F. Under laboratory conditions temperatures can be controlled within +/-1°F. Actual operational range is determined by control location, circulation rate, etc. The stainless steel construction is a simple design - the head, inner valve, spring, and link can be removed, inspected, and reassembled in a short time.
A 5 F temperature change causes 3-15 psi output signal change with 20 psi to 25 psi supply recommended.
Model CTS-5025B Temperature Controller
The Model CTS-5025B is the latest version of the thermal expansion-type temperature controls. It is provided with two adjustments. 1) Temperature setpoint control. 2) A unique proportionality control. The temperature setpoint control permits the instrument to be set at any position from 0°F to 750°F. The proportionality control allows the operator to set the temperature span desirable It is calibrated from 4°F to 60°F, which is the temperature change required to produce 3-15 psi output. The principle difference between standard CTS-5025 and the CTS-5025B throttling control is the rotatable seat adjustable from the control face. The orifice in the seat is drilled eccentrically so that rotating the seat moves the orifice with respect to the adjusting screw. This regulates the amount the orifice is opened per degree of temperature reduction.
Vent Line Flash Arrestor
Vent Line Flash Arrestors are available for use on tank or similar low pressure, vertical, vent lines to reduce chances for combustion within the line from an external source. All steel construction except 4" thick aluminum element.
|
|